Not long ago, warehouses were at the center of a U.S. construction boom. As e-commerce surged during the pandemic, developers raced to keep up and between 2022 and 2024 a huge wave of new warehouse and distribution space hit the market.
Today, the spotlight has moved to data centers. From the highway, the two can look much alike: big buildings with few windows and acres of exterior surface to enclose. For the teams building them, some of the priorities overlap.
The data center boom has been remarkable. Data center construction spending rose 8.6% in September, according to an Associated Builders and Contractors (ABC) analysis of U.S. Census Bureau data. ABC calculated that spending has grown at a 217% annualized pace since May.
“Frankly, it’s becoming difficult to contextualize the size and speed of this boom,” ABC Chief Economist Anirban Basu said in October.
Warehouse construction has cooled from its pandemic-era peak, but demand for large-format distribution facilities has been strengthening. According to Cushman & Wakefield, approximately 324 million square feet of industrial space was under construction in the third quarter of 2026, up 23% from a year earlier, its highest level since mid-2024.
The markets are at different stages, but both building types present an opportunity for insulated metal panels (IMPs). We’ve written about IMPs in data center construction before. This time, we’re looking at why they’re also used in distribution hubs and where the benefits overlap: enclosing large buildings quickly, helping control interior conditions and supporting energy efficiency.
On a large data center or distribution center project, almost nothing important can happen inside until the building is enclosed. Electrical gear, cooling equipment, racking and conveyor systems all need a dry, protected space. Every week spent closing in the envelope is a week those trades wait.
A conventional framed wall is built in layers, often by different crews working in sequence:
Sheathing.
A weather-resistive barrier.
An air barrier.
Insulation.
Exterior cladding.
IMPs combine metal facings and an insulating core in one factory-made panel installed over the building’s supporting framing. Industry guidance notes that using IMPs eliminates the need for multiple trades as the systems are erected by a single trade. One crew hangs a panel and that section of wall is clad, insulated and sealed in one step, with joint sealants, flashings and perimeter details completing the system.
On buildings this size, the benefits add up quickly:
Fewer trades on site and fewer handoffs between them.
Fewer opportunities for sequencing and coordination problems.
Earlier dry-in, so interior electrical, mechanical and racking work can start sooner.
Wall panels are only part of that milestone. Roofing, openings and transitions also need to be completed and sealed before the building is fully dried in.
Speed matters, but airtightness is often the bigger reason IMPs get specified on these projects.
A data center is basically a machine for removing heat. Its cooling systems are designed around specific temperature and humidity ranges and air leaking through the envelope works against them. Depending on the climate and the facility’s cooling strategy, uncontrolled air leakage can bring in:
Humidity that the cooling plant has to remove.
Dust and particulates that can affect sensitive equipment.
Heat that raises cooling loads and energy costs.
Many distribution centers face similar demands, including:
Cold storage and food distribution facilities that must hold steady temperatures around the clock.
Pharmaceutical warehouses with strict climate requirements for stored products.
Electronics and high-value goods facilities where humidity control protects inventory.
In these buildings, air leaks show up directly in energy bills and in the stability of stored goods.
IMPs are well suited to this work. They provide insulation, durability, structural capacity and a continuous air barrier in a single, relatively easy-to-install panel, with the air barrier built into the panel system itself rather than assembled from separate materials by different trades. Interlocking side joints and factory-controlled sealant placement help the panels perform consistently across huge wall areas, where small inconsistencies in field-built assemblies can add up.
Installation still matters. Panel joints, openings and transitions to roofs and foundations need careful detailing and they should be checked during construction.
Large buildings have huge surface areas, so the insulation in the envelope has a big effect on operating costs. In many conventional wall assemblies, steel framing passes through the insulation layer and creates thermal bridges that let heat move in or out.
With IMPs, the insulating core runs continuously from panel to panel, outside the structural frame, greatly reducing thermal bridging through the main framing. Joints, fasteners and penetrations still need careful detailing, but the result is thermal performance that is easier to predict and helps owners meet energy code requirements. For a data center trying to manage cooling loads or a cold storage facility running refrigeration all year, that consistency matters over the life of the building.
Data centers hold high-value equipment and data that can’t be replaced, so fire protection gets a lot of attention from owners, insurers and code officials. Large warehouses holding significant inventory face similar scrutiny.
MP selection should account for those requirements from the start. Green Span Profiles offers INSULROCK, a mineral wool core panel designed for fire-rated applications, alongside its standard insulated wall and roof systems. Where a fire-resistance rating is required, the panel is only part of the picture: the design must follow the tested assembly, including its connections and penetration details. Working with the panel manufacturer early in design helps ensure the envelope meets the fire, wind and energy requirements for the specific project and location.
These buildings are often judged on function, but appearance still counts. Distribution centers sit along highways and in business parks and many data center developers now face closer scrutiny from local planning boards and neighbors. IMPs give long, clean wall planes with concealed fasteners on many profiles and architectural profiles can add texture or detail at entrances and office areas without changing the basic envelope system.
Data centers and distribution hubs share a common set of priorities: get enclosed fast, keep the inside controlled and keep operating costs predictable for decades. IMPs address all three in one product installed by one trade.
Green Span Profiles has manufactured insulated metal panels at its plant in Waller, Texas, since 2011, with eight exterior wall, liner wall and partition wall systems, plus two roof systems, to choose from. Contact Green Span Profiles today to discuss enclosure options for your next data center or logistics project.